行业动态

澳洲发布新版灯具安全标准:AS/NZS 60598.1:2017+A1:2017+A2:2020

  • 发布时间:2020/12/10
  • 来源:深圳凯瑞产品技术服务有限公司
  • 0

在澳大利亚,电器产品分为公告电器产品和非公告电器产品。公告电器产品为强制认证产品,非公告电器产品为自愿认证产品。所有销往澳大利亚的电器产品符合电器安全法案2004 版及其相关电器安全法规2006版的要求。

 

2020年11月27日,澳洲官方发布了灯具安全标准的最新版本(主要修订了澳洲偏差部分内容)AS/NZS 60598.1:2017+A1:2017+A2:2020。

The new amendment(A2:2020) is amended to the 2017 edition of AS/NZS 60598.1, and it is approved and published on 27 November 2020.

修订主要在附录ZZ的澳洲偏差(见下表修订明细):

 Clause

      修订Revision

 

3.3.103

 

因澳大利亚/新西兰不允许保护导体电流大于10mA,删除 “允许说明书特别注明保护导体电流大于10mA”的要求。

Delete the text and replace with the following Note:

NOTEIn Australia and New Zealand, there is no allowance for a protective conductorcurrent greater than 10 mA.

 4.32  

删除压敏电阻的简单要求,在4.32.3细化

Appendix ZZ variation to Clause 4.32

Delete the text of the variation to Clause 4.32 and replace with the following:

 4.32.1  

增加防雷击浪涌、瞬态过电压保护装置的分类,区分为SPD(浪涌保护装置)和SPC(浪涌保护元件)。

Delete the text and replace with the following:

4.32.1 General

To limit the effects of lightning surges and other transient overvoltages, overvoltageproteotive devices may be used in luminaires and they can be either Surge protectivedevices (SPDs) or surge protective components (SPCs).

NOTE: Examples of SPCs are varistors (MOVs) and gas discharge tubes (GDTs). SPCs may beintegrated with thermal protection devices, such as thermal fuses or PTCs, in the same package.SPDs will utilize SPCs and are a complete assembly.

 4.32.2  

SPD(浪涌保护装置)需要符合IEC 61643-11标准。外置于控制装置的SPD只能用于固定式灯具且必须连接到保护接地。

4.32.2 Surge protective devices (SPDs)

SPDs shall comply with IEC 61643-11. SPDs that are external to controlgear and connectedto earth shall be used only in fixed luminaires and shall be connected only to a protectiveearth.

 4.32.3  

外置于控制装置的SPC(比如压敏电阻、放电管等)需要满足AS/NZS 3100的相关章节要求。

4.32.3 Surge protective components (SPCs)

SPCs that are external to controlgear shall comply with the requirements of AS/NZS 3100for varistors.

 4.101  

不再要求纽扣电池的电池腔盖子只能借助工具才能打开。如果打开盖子是通过两个独里的动作来完成的,亦可接受。

Appendix zz Clause 4.101

In Clause 4.101.1, delete first three paragraphs and replace with the following text:

Button cells and batteries designated R1 shall not be removable without the aid of a toolunless the cover of their compartment can only be opened after at least two independentmovemenishavebeen applied simultaneously.Refer to AS/NZS 60335.1:2011Clause 22.54.

NOTE: Batteries are specified in IEC 60086-2.

 8.2.1  

1、删除最后一句描述,因为4.29章节已经有描述,无需赘述。

2、重新引入原来删除的概念,但是修订为“徒手可以移除的罩盖需要先拿走”。

Appendix ZZ variations to Clause 8.2.1

1、In the first item, third sentence, delete "Luminaires with non-replaceable light sourcesare subjected to the tests of Clause 4.29 prior to applying the tests and inspections ofSection 8 of this Standard".

Delete the text of the second item, and replace with the following:

2、Delete the ninth paragraph beginning with Covers in fixed luminaires that cannot beremoved

and replace with 'Covers that can be removed by hand shall be removed."

 


关于我们
公司简介
服务宗旨
认证检测
环境可靠性分析检测
照明灯具产品检测
物理/化学分析检测
电子电器产品检测
服装/鞋帽/箱包检测
儿童玩具产品检测
我们的服务
行业
主题
服务类型
新闻资讯
公司新闻
行业动态
联系我们
  • 电话:86-0755-23707265
  • 传真:86-0755-23707265
  • 手机:86-13428972325
  • 微信:emilykinkong
  • E-mail:emily578@163.com
  • www.pcs-cert.com
  • 地址:深圳市宝安区福永机场道 1011号机场信息大楼307
友情链接
sanford | Baidu | Alibaba |